Konica Minolta bizhub 252 is not loaded to the system at startup

[LinART]

Konica Minolta bizhub 252 is not loaded to the system at startup. The screen shows a clock, then fades out the screen. I suspect that the problem with NVRAM. Now I want to write the firmware from the CF ... But I can not find it. Anyone can send an e-mail admin@sadmin.org firmware for 252p, for example, 4038-F000-G00-K0-300_CHECKSUM-6452 (Phase 3.05)? Or NVRAM recovery firmware bizhub C250/C252: 20070301_4038-F000-GCN-G4-000 (2000), Checksum: 16E6.EXE. Thank you.

[RRodgers]

Try a trouble reset first. Turn the machine on while holding down the Utility key.

[LinART]

Try a trouble reset first. Turn the machine on while holding down the Utility key.

It did not help.

[xsstaff]

hi there! please tell me if you managed the situation... i'm in the same position, and i can't find the nvram recovery for bizhub c252. if you need, i have the firmware you requested. thanks!

[LinART]

hi there! please tell me if you managed the situation... i'm in the same position, and i can't find the nvram recovery for bizhub c252. if you need, i have the firmware you requested. thanks!

I solved the problem with NVRAM recovery firmware bizhub C250/C252. I can share. Contact with PM

[radew]

Dear All,

I also have the similar problem and been trying to program the copier without any success despite with the technician from the local copier company ..

I will be grateful if someone could give me a pointer ?

Cheers,
Mao

[Naveed Shahid]

I solved the problem with NVRAM recovery firmware bizhub C250/C252. I can share. Contact with PM

can u send me solution i am also facing same problem

thanks
naveed
toshiba_estudio@yahoo.com

[ozkan]

Hi I have the same problem, but I couldn't find the firmware. Any suggestions?