Thanks:
0
Likes:
0
Dislikes:
0
-
minolta di 470 doc feeder not recognizing sizes
off the glass the machine will detect letter and legal. off the df it will feed and then stop and say (matching paper size not available) at least I think that is what it said. if you at that point manually select a tray then it will be fine. I have unplugged and plugged in the df. I have initialized the machine. and also have checked the length sensors in the tech rep mode. I may have to replace the pwb a in the df. what are some thoughts on this? thanks
brent
-
Trusted Tech
50+ Posts
- Rep Power
- 35
Does the machine say what size original is in the feeder when you place it on the tray? I had a machine that detected originals as 11x17, no matter what size the original was. The problem ended up being the lights above the machine! I moved the machine a few feet and never had the problem again.
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Bookmarks