Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 10 of 10
  1. #1
    Technician
    Join Date
    Mar 2010
    Posts
    21
    Rep Power
    29

    Konica C6500 error c2813

    Does anyone have any thoughts on error code c-2813?

    I have tried changing the drums, charging coronas and cleaned the Drum potential sensors- and still errors out.
    Is there is a quick workaround to this problem?

    Machine has 620k prints.

    If I need to change the HV detecting sensor assembly- How do I need which one is the bad one? Do i Have to change all 4? Or is there a test in service mode to determine which sensor is bad?

    Thanks!!!!

  2. #2
    Senior Tech 100+ Posts
    Konica C6500 error c2813

    Gamut's Avatar
    Join Date
    Jul 2008
    Posts
    216
    Rep Power
    35
    The 13 in 2813 tells you it's Cyan drum pot sensor, you can swop these around to prove ie: moving to Magenta should change code to 2812.
    BK=14
    Yellow=11

  3. #3
    ESA
    Guest
    There was a post for this already. If you swapped out units and cleaned sensors then your internal values are screwed up. You need to either tone up or down. What happened prior to code?

  4. #4
    Technician
    Join Date
    Dec 2007
    Location
    doha
    Posts
    14
    Rep Power
    33

    potential sensor Part Number

    hi all
    can any one of you advice me where i can get the drum potential sensor C.M.Y.B part numbers in bizhub C6500?
    regards
    Attached Files Attached Files

  5. #5
    Technician
    Join Date
    Mar 2010
    Posts
    21
    Rep Power
    29
    (p/n A03U R736 00)

  6. #6
    Technician
    Join Date
    Dec 2007
    Location
    doha
    Posts
    14
    Rep Power
    33
    thanks xpedx102 for your reply
    actully this P/N for TCRS not drum potential sensor , is it same ?
    regards

  7. #7
    Technician
    Join Date
    Mar 2010
    Posts
    21
    Rep Power
    29
    That's for the drum potential- here is a link where to buy:

    Konica Minolta A03U-R736-00

  8. #8
    d.v.ramanababu
    Guest

    Konica bizhubC6000 error c2813

    Does anyone have any thoughts on error code c-2813

    i inter changed Developing units even though the error code was same and i replaced new developing unit and charging units, drums also
    and also same problem and i done P.M procedure all parts. same problem. plz any body give good soluation.


    babu

  9. #9
    Senior Tech 100+ Posts
    Join Date
    Dec 2010
    Posts
    126
    Rep Power
    0

    Thumbs up Re: Konica bizhubC6000 error c2813

    Quote Originally Posted by d.v.ramanababu View Post
    Does anyone have any thoughts on error code c-2813

    i inter changed Developing units even though the error code was same and i replaced new developing unit and charging units, drums also
    and also same problem and i done P.M procedure all parts. same problem. plz any body give good soluation.


    babu
    2813....error related to execss charge on drum beyond specified value
    Solutions.....1) clean HV contacts (back side of the processor unit)



    2) color correction unit IDC senswe

    3)'developer change as developers purge due to PM or may be contamination..or over toned.

    Since you have already changed the other necessary pm
    Parts.
    Recall the standard values and start from initial settings to get rid of this error

  10. #10
    Senior Tech 100+ Posts
    Join Date
    Feb 2010
    Posts
    218
    Rep Power
    0

    Re: Konica C6500 error c2813

    No real quick fix, I would swap out the toner in the developer add some new one after a good cleaning of the area surrounding the developer.

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here