Thanks:
0
Likes:
0
Dislikes:
0
-
Senior Tech
100+ Posts
- Rep Power
- 34
bizhubpro c6501 banner printing
machine prints only 0ne banner at a time .when printing is set to multiple copies paper jam occurs at the fusing section and does not attempt to pick another paper.any settings orconfiguration required.banner length is 635mm
thanks
-
Senior Tech
100+ Posts
- Rep Power
- 34
That's because you can only print 1 banner at a time, try duplicating the Job in the Fiery into 10 different single print jobs and select and batch print them all in one go...... that way the machine will print each single job 1 at a time.
10 is a good number as its easy to keep track of how many you are doing. Approx speed takes about 50 secs per Banner
Also make sure that Continuation Print in is switched off in User setting> Common setting
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Bookmarks