I sent you a pm....
and further information for others with this code....
Intermittent C-1265 code.
Solution
CAUSE: Dirty contacts on the machine memory.
SOLUTION: Remove the memory and clean the contacts:
1. Turn off the machine and unplug the power cord.
2. Remove the lower rear cover (7 screws).
3. Remove the upper rear cover (5 screws).
4. Open the right door and remove the right rear cover (4 screws).
5. Remove the shield cover (12 screws).
6. Remove the memory from tthe slot labeled FILE 0 of the control board and clean its contacts. Repeat the process for the memory in slot FILE 1.
Note: The memory is highly susceptible to damage by static electricity. Use a grounding wrist strap or touch the metal frame of the machine to discharge
yourself before handling the memory.
C1261, C1265, error message at power up.
Solution
CAUSE: Expanded 256 memory card has failed and/or is incompatible.
SOLUTION: Reseat, replace the 256MB memory upgrade (EM301) (Item #4599291).
The engine requires 512MB of memory, 256MB base memory and the EM301 256MB memory upgrade to function properly when both the IC401 and AD501
are installed
From these solutions, I would say your memory cards have become corrupted (damaged) or possible the contacts are dirty.
Cleaning the contacts...use an oxide eraser. Those old blue "pen" erasers, if you can get one, will work. Or if you are fortunate, a pen type oxide...the eraser has to be gritty. Emery paper in a pinch. Just give the contacts of the memory a quick buff to make em shiny.
Bookmarks