Likes Likes:  0
Dislikes Dislikes:  0
Page 3 of 5 FirstFirst 12345 LastLast
Results 21 to 30 of 42
  1. #21
    Senior Tech 100+ Posts HORSE's Avatar
    Join Date
    Mar 2008
    Location
    Sydney
    Posts
    186
    Rep Power
    25
    Quote Originally Posted by jma676 View Post
    Well try to understand, but the order of words confuses me, anyway, C-2411 refers to a problem with the detection of density on the yellow developing unit.

    The first thing you should check is the status of the developer, the developer can remember inicializarze only once when new. (Unless you're an expert and you can manually control the density).

    Well I think you should also review the charge corona unit yellow, it is common that the filament of the crown is displaced causing the toner with the developer to stop the boat can go to waste (toner Collection Box).

    After all this if the problem continues to try to replace the TCR to the other drive first, it's difficult for the PRCB or developing unit may be at fault, unless someone is risky to do testing with a tester or something like trying to solve the problem and thus break the PRCB or TCR, if so, the bizhub PRO accuse C-2411 All the Time.
    Thanks for your input Superman, did you actually read this thread from start to finish?

    I understood you up to the point where the Developer to stop the boat......... then like you said the order of words confuses me.
    Laughing......

  2. #22
    All things Konica Minolta 1,000+ Posts Stirton.M's Avatar
    Join Date
    Oct 2009
    Location
    Calgary
    Posts
    1,818
    Rep Power
    43
    Thank god you saw exactly what I saw. I thought I had a stroke and was suddenly having word dyslexia.
    "Many years ago I chased a woman for almost two years, only to discover that her tastes were exactly like mine: we both were crazy about girls."
    ---Groucho Marx


    Please do not PM me for questions related to Konica Minolta hardware.
    I will not answer requests or questions there.
    Please ask in the KM forum for the benefit of others to see the question and give their input.

  3. #23
    Field Supervisor 1,000+ Posts RRodgers's Avatar
    Join Date
    Jun 2009
    Location
    San Bernardino
    Posts
    1,959
    Rep Power
    46
    Reads like a firmware notes from KM. LOL
    Color is not 4 times harder... it's 65,000 times harder. They call it "TECH MODE" for a reason. I have manual's and firmware for ya, course... you are going to have to earn it.

  4. #24
    Expert Tech 250+ Posts jma676's Avatar
    Join Date
    Mar 2009
    Location
    Cap. Fed.
    Posts
    321
    Rep Power
    0
    Well I meant that the developer is carried along with the toner by The Drum to the toner collecting box, caused by low charge produced by the corona, moved or bad contact.

  5. #25
    Field Supervisor 1,000+ Posts RRodgers's Avatar
    Join Date
    Jun 2009
    Location
    San Bernardino
    Posts
    1,959
    Rep Power
    46
    Quote Originally Posted by jma676 View Post
    Well I meant that the developer is carried along with the toner by The Drum to the toner collecting box, caused by low charge produced by the corona, moved or bad contact.
    Well I'll give ya credit for at least offering to help.
    Color is not 4 times harder... it's 65,000 times harder. They call it "TECH MODE" for a reason. I have manual's and firmware for ya, course... you are going to have to earn it.

  6. #26
    Expert Tech 250+ Posts jma676's Avatar
    Join Date
    Mar 2009
    Location
    Cap. Fed.
    Posts
    321
    Rep Power
    0
    Tanks RRodgers!!!!!!!!!

  7. #27
    Expert Tech 250+ Posts jma676's Avatar
    Join Date
    Mar 2009
    Location
    Cap. Fed.
    Posts
    321
    Rep Power
    0
    Quote Originally Posted by HORSE View Post
    When you push the Process unit back into the machine and lock back the long steel handles do find them hard to lock?

    I have had issues on a few different machines where the connector at the back of the process was not making a good connection and throwing a C24-11 or C24-01


    Also on the faulty PRCB have you checked all the ICPs, are any OC?


    hello guys should try it !!!!!!!!!!!!!
    Attached Images Attached Images

  8. #28
    Trusted Tech 50+ Posts Chromatik's Avatar
    Join Date
    Aug 2010
    Location
    Santa Cruz
    Posts
    71
    Rep Power
    0
    Really impressive!!!!!!!!!

  9. #29
    Senior Tech 100+ Posts HORSE's Avatar
    Join Date
    Mar 2008
    Location
    Sydney
    Posts
    186
    Rep Power
    25
    Re: The original fault C-2411 there was a TAD released on 31/08/2010 for this problem TAUS0703727EN01
    Laughing......

  10. #30
    All things Konica Minolta 1,000+ Posts Stirton.M's Avatar
    Join Date
    Oct 2009
    Location
    Calgary
    Posts
    1,818
    Rep Power
    43
    Yes, we had been over all that as you recall.

    Solution was to replace harness on process unit, at least in this case.
    "Many years ago I chased a woman for almost two years, only to discover that her tastes were exactly like mine: we both were crazy about girls."
    ---Groucho Marx


    Please do not PM me for questions related to Konica Minolta hardware.
    I will not answer requests or questions there.
    Please ask in the KM forum for the benefit of others to see the question and give their input.

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here