Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Page 2 of 2 FirstFirst 12
Results 11 to 15 of 15
  1. #11
    Senior Tech 100+ Posts
    Join Date
    Sep 2010
    Location
    Toronto
    Posts
    162
    Rep Power
    0
    but how I'm in 25 mode otherwise error 89-01

  2. #12
    Expert Tech 250+ Posts jma676's Avatar
    Join Date
    Mar 2009
    Location
    Cap. Fed.
    Posts
    324
    Rep Power
    0
    Serial Number in 25 Mode

    M/C serial number setting
    Display and set the serial numbers of the main body
    and options


    1. Enter the 25 mode.

    2. "25 mode menu screen" Press the [8. M/C serial number setting] key.

    3.
    do not change anything... just Display.


    Note:
    • The serial number of the main body cannot be changed.

    Or Check: Counter list Print, Managment List, Mainbody...

  3. #13
    Senior Tech 100+ Posts
    Join Date
    Sep 2010
    Location
    Toronto
    Posts
    162
    Rep Power
    0
    Thank you

  4. #14
    Junior Member
    Join Date
    Aug 2016
    Location
    DA NANG
    Posts
    4
    Rep Power
    0

    Re: Konica Minolta C500 SC-89-01

    I follow your instructions. and discovered errors SC89-02. Would you guide me how to resolve this error code. The next step how to do.
    Reasons "I replaced a OACB main board from one machine to another. SC89-01 error detection. Follow the instructions from you, SC89-02 error detection". looking forward to your help.

    Note: Board change mode=
    When changing any of the following four types of
    boards, be sure to set the serial number of the main
    body in this setting.

    OPERATION (operation board /1).
    OVERALL CB (overall control board).
    NVRAM (memory board).
    PRINTER (printer control board).

    Procedure

    1. Enter the 25 mode.

    2. "25 mode menu screen" Press the [13. Board change mode] key.

    3. "Board change mode screen" Select a key of the board that you have replaced a part.

    4. "Serial number input screen" Enter the serial number of the main body through the alphanumeric keys.

    5.
    Press the [OK] key to update the data.
    To invalidate the setting that you have changed, press the [CANCEL] key.


    And..............: The number of boards that can be replaced at the same time is restricted only to two boards.[/QUOTE]

  5. #15
    Expert Tech 250+ Posts jma676's Avatar
    Join Date
    Mar 2009
    Location
    Cap. Fed.
    Posts
    324
    Rep Power
    0

    Re: Konica Minolta C500 SC-89-01

    Quote Originally Posted by HUYNHTUONG View Post
    I follow your instructions. and discovered errors SC89-02. Would you guide me how to resolve this error code. The next step how to do.
    Reasons "I replaced a OACB main board from one machine to another. SC89-01 error detection. Follow the instructions from you, SC89-02 error detection". looking forward to your help.

    Note: Board change mode=
    When changing any of the following four types of
    boards, be sure to set the serial number of the main
    body in this setting.

    OPERATION (operation board /1).
    OVERALL CB (overall control board).
    NVRAM (memory board).
    PRINTER (printer control board).

    Procedure

    1. Enter the 25 mode.

    2. "25 mode menu screen" Press the [13. Board change mode] key.

    3. "Board change mode screen" Select a key of the board that you have replaced a part.

    4. "Serial number input screen" Enter the serial number of the main body through the alphanumeric keys.

    5.
    Press the [OK] key to update the data.
    To invalidate the setting that you have changed, press the [CANCEL] key.


    And..............: The number of boards that can be replaced at the same time is restricted only to two boards.
    [/QUOTE]



    Hello, those instructions are not mine, they are from Bulletins or Service Manuals. (It is advisable to follow the thread of the post to know that each answer corresponds to the previous one.).

    That is de last KM Guide to this error.

    Solution ID TAUS0640895EN*

    Description

    SC89-xx after replacing the status (main CB) board, operation board, printer CB or NVRAM.


    CAUSE: The machine serial number needs to be programmed using the Board Change Mode.

    SOLUTION: To program the machine serial number, perform the following:

    1. Flash the status CB (main CB), printer CB or operation board to the latest firmware level prior to performing the Board Change Mode.
    2. Access the 25 mode (power machine OFF/ON while pressing the 2 and 5 keys).
    3. Select Board Change Mode.
    4. Select the board that was changed (operation, overall CB, NVRAM, printer CB).
    5. Press OK.
    6. Enter the machine serial number using the alphanumeric key pad on the touchscreen.
    7. .Press OK.
    8. Power the machine OFF/ON.

    ERROR CODE EXPLANATION

    - SC89-01
    This code is caused by incompatibility between the replaced PRDB assigned S/N and mainbody S/N. For example, when trying to install the PRDB which was removed from 65AE00001 to 65AE00005 main body.

    - SC89-03
    This code is caused by performing Board Change Mode with a used PRDB. For example, when trying to install the PRDB which was removed from
    65AE00001 to 65AE00005 main body and perform Board Change Mode.

    IMPORTANT: As a troubleshooting 'tool', a new or used Printer CB, Overall CB, or Operation Board can be temporarily installed in the 8050 for testing purposes without using Board Change Mode.

    Notes:
    * The number of boards that can be replaced at one time is restricted to two. Boards must be new, swapping between machines is prohibited.


    Trademark ownership information Copyright 2010, Konica Minolta Business Solutions U.S.A., Inc.

    My Note: Bulletins error: PRDB is wrong. I think is refer to PRCB ("PR" Printer "CB" Control Board)

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here