"SC89-xx after replacing a PWB (Overall Control, Printer Control, or Operation PWB).
Solution
CAUSE: The machine serial number needs to be programmed using the Board Change Mode.
SOLUTION: To program the machine serial number, perform the following:
1. Flash the status CB (main CB), printer CB or operation board to the latest firmware level prior to performing the Board Change Mode.
2. Access the 25 mode (power machine OFF/ON while pressing the 2 and 5 keys).
3. Select Board Change Mode.
4. Select the board that was changed (operation, overall CB, NVRAM, printer CB).
5. Press OK.
6. Enter the machine serial number using the alphanumeric key pad on the touchscreen.
7. .Press OK.
8. Power the machine OFF/ON.
ERROR CODE EXPLANATION
- SC89-01
This code is caused by incompatibility between the replaced PRDB assigned S/N and mainbody S/N. For example, when trying to install the PRDB which was
removed from Machine A to Machine B main body.
- SC89-03
This code is caused by performing Board Change Mode with a used PRDB. For example, when trying to install the PRDB which was removed from Machine A
to Machine B main body and perform Board Change Mode.
IMPORTANT :As a troubleshooting 'tool', a new or used Printer CB, Overall CB, or Operation Board can be temporarily installed in theMFP for testing
purposes without using Board Change Mode.
Notes :
1. The number of boards that can be replaced at one time is restricted to two. Boards must be new, swapping between machines is prohibited.
2. Please refer to attached documentation for additional detail. To view a PDF, Adobe Reader® must be installed. Adobe Reader® can be downloaded for
free from the Adobe® web site at:
Adobe - Adobe Reader download - All versions .
SPECIAL NOTE : Solution contribution by Cesar Jimenez, Production Print/SSD"
sow dear friend,
if u try a change boards into another machines is not work one by one. i try this. Boards must be new, swapping between machines is prohibited.
now i try change all 4 board into another mashines A to B. all controller and PRCB in the same machine. maybe work this way.if is work i let u know .
Bookmarks