Hi all
Anyone know the solution for warming up problem on bizhub 600?
"now Warming up" shown during time in panel and never being "Ready to copy". Whats wrong with my bizhub 600? Any solution I will appreciate. Thank you.
Hi all
Anyone know the solution for warming up problem on bizhub 600?
"now Warming up" shown during time in panel and never being "Ready to copy". Whats wrong with my bizhub 600? Any solution I will appreciate. Thank you.
A lot of times on a kONICA, it is looking for toner when it is warming up. It will stick on please wait, if the patch sensor for the drum is dirty.
The greatest enemy of knowledge isn't ignorance, it is the illusion of knowledge. Stephen Hawking
Fix is right! I had one yesterday, when I removed the drum carriage and the cover the cleaning section was overflowing with toner I rescheduled for a recycle clutch and all is well. Of course cleaning the sensors solved the warm up issue, I just wanted to point out in my case the sensors were polluted due to a bad clutch.
Online Store is closed. Chip resetting is a thing of the past! Thank you to all my past customers.
Now into Ip TV KODI Boxes
I tried to clean the drum sensors but still "Now warming up". Then I try to replace the drum sensors and still the same problem.
Any other solutions? Thank you for responding.
This can also be caused by outdated/corrupt firmware. Try updating your machine to the latest firmware using a USB Thumb Drive... This is 99.9% of the time the aforementioned sensors though. Double and triple check them.
I dont know why. But my bizhub 600 works normaly.
Next problem, when I used the bizhub 600 for copying more than 100 sheets, black background shown. Any suggestion?
no need of to change any firmware and drum.
i have 200% correct formula for this copier (biz600/750/ di7210/7272). no toner on corona, no warming up, pleasewait.
contact me at chand226@gmail.com
no need of to change any firmware and drum.
i have 200% correct formula for this copier (biz600/750/ di7210/7272). no toner on corona, no warming up, pleasewait.
contact me at chand226@gmail.com
no need of to change any firmware and drum.
i have 200% correct formula for this copier (biz600/750/ di7210/7272). no toner on corona, no warming up, pleasewait.
contact me at chand226@gmail.com
Bookmarks