Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 7 of 7
  1. #1
    Technician
    Join Date
    Mar 2010
    Posts
    14
    Rep Power
    29

    Bizhub C250 double imaging

    I have a Bizhub C250 that has been doulble imaging down the page and it does it in all colors. I replaced the fuser assembly and that worked for two days and now it is back and worse than before. I increadsed the fuser temp by 5 for both the hot and pressure roller and it still has not made a difference. I am kind of at a loss at this one. I have inspected the transfer belt and all of the drums and do not see a problem.

    Any help out there?

  2. #2
    All things Konica Minolta 1,000+ Posts Stirton.M's Avatar
    Join Date
    Oct 2009
    Location
    Calgary
    Posts
    1,813
    Rep Power
    52
    Do you have the fuser in envelope mode?

    Check the green tabs on the front and rear sides, make sure they are up and not down.
    "Many years ago I chased a woman for almost two years, only to discover that her tastes were exactly like mine: we both were crazy about girls."
    ---Groucho Marx


    Please do not PM me for questions related to Konica Minolta hardware.
    I will not answer requests or questions there.
    Please ask in the KM forum for the benefit of others to see the question and give their input.

  3. #3
    Senior Tech 100+ Posts PeterG's Avatar
    Join Date
    Jul 2008
    Location
    Bendigo
    Posts
    177
    Rep Power
    33
    Someone is going to be embarrassed over that one.

  4. #4
    Field Supervisor 500+ Posts
    Bizhub C250 double imaging

    copytechman's Avatar
    Join Date
    Nov 2008
    Location
    Barrie, Ontario
    Posts
    909
    Rep Power
    44
    Also check your 2nd transfer roller. I've seen the newer series (c203-353) have those fail and produce symptoms that look pretty much the same as a failed fuser. Led me down the garden path too. Had 1 case of it with a c250 iirc.

    Regards!
    A.

  5. #5
    Technician
    Join Date
    Mar 2010
    Posts
    14
    Rep Power
    29
    Ok I am embarrased the fuser was in envelope mode and I will admit that I missed that in my haste to repair this machine. The original problem was not fusing on one side and it was not in envelope mode so I didn't even look at that. Thanks for your help.

  6. #6
    Senior Tech 100+ Posts PeterG's Avatar
    Join Date
    Jul 2008
    Location
    Bendigo
    Posts
    177
    Rep Power
    33
    I doubt their is a single one of us that hasn't fallen for that one Timothy.

  7. #7
    All things Konica Minolta 1,000+ Posts Stirton.M's Avatar
    Join Date
    Oct 2009
    Location
    Calgary
    Posts
    1,813
    Rep Power
    52
    There are days we are all sleeping at the wheel..... heh

    :P
    "Many years ago I chased a woman for almost two years, only to discover that her tastes were exactly like mine: we both were crazy about girls."
    ---Groucho Marx


    Please do not PM me for questions related to Konica Minolta hardware.
    I will not answer requests or questions there.
    Please ask in the KM forum for the benefit of others to see the question and give their input.

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here