Entire feed head was replaced, same paper runs fine from trays 1-3 and bypass.
Entire feed head was replaced, same paper runs fine from trays 1-3 and bypass.
I'm not sure then....beyond the physical, the problem may be electronic...swap the sensors that are related to the jam, swap maybe the MFP. May even be a pinched or frayed wire, though I have my doubts.
"Many years ago I chased a woman for almost two years, only to discover that her tastes were exactly like mine: we both were crazy about girls."
---Groucho Marx
Please do not PM me for questions related to Konica Minolta hardware.
I will not answer requests or questions there.
Please ask in the KM forum for the benefit of others to see the question and give their input.
Is there a point to your posting drivel in this forum?
"Many years ago I chased a woman for almost two years, only to discover that her tastes were exactly like mine: we both were crazy about girls."
---Groucho Marx
Please do not PM me for questions related to Konica Minolta hardware.
I will not answer requests or questions there.
Please ask in the KM forum for the benefit of others to see the question and give their input.
Hey, I did not get started, anyway, other people, if they are really bad.
http://entretenimiento.latam.msn.com...o-a-la-basura/
Just thought I'd update this issue... I replaced PRCB, MFP board, and paper feed control board, re-flashed firmware with no affect. Does anyone know if the paper feed drive assy has any 1 ways, electro clutches, etc that are only associated with tray 4? SM is kind of vauge, but looks like everything works to turn tray 3 and 4, only the individual feed head clutches separate which tray is actually driving..Emujo
Bookmarks