Originally Posted by
habik
Old thread new problem with C203 DF-611
Did MOD of the paper lift motor plate KM
Did MOD of the paper lift plate as per Mercutio Norway
Did Mod as per Emujo rear screws removal
Have New tyres, other rollers and Sensors plus black pads are pristine clean, when loaded full to top machine jams half way usually with 6603.
When doing ADF paper passage test single or double in Service mode the machine freezes when above 6603 jam occurs.Tried different doc feeder same issue. Reboot required each time.
Reloaded with R6 firmware. Same thing.
Dusted all boards, power supply as it came from building site.
Now it does not freeze anymore, after massive dusting mayhem of the whole machine, it still jams in ADF usually half way through full load.
Any suggestions other than Sledge hammer...as I already have it on hand.
Thanks
Bookmarks