Hi guys, I have a C452 which i need to reset all network settings on. Anybody know how?
Hi guys, I have a C452 which i need to reset all network settings on. Anybody know how?
Check: User's Guide (Network Administrator)
Color is not 4 times harder... it's 65,000 times harder. They call it "TECH MODE" for a reason. I have manual's and firmware for ya, course... you are going to have to earn it.
Thanks but I need to reset all settings to default on NIC
And to do that you go into Administrator and access the network settings and erase any and all settings within that.
Is there any particular reason you want to reset these?
"Many years ago I chased a woman for almost two years, only to discover that her tastes were exactly like mine: we both were crazy about girls."
---Groucho Marx
Please do not PM me for questions related to Konica Minolta hardware.
I will not answer requests or questions there.
Please ask in the KM forum for the benefit of others to see the question and give their input.
more radical, use the stools !
" French do it better " ^^
The only way to clear a NIC that I know of is to use the NVRAM recovery tool that you install on the flash card, it gives you 2 options when in the machine one to reset the NIC and the other is to recover NVRAM...... Might want to give that a whirl.
as I said before:Check: User's Guide (Network Administrator)
You, Maybe, not compose well the question, or want to refer to something else, ooooh... read the manual, if you want to restore any settings, just do it, you want to configure the IP address again, between a new and longer.
Anyway.
-------------------------------------------------------------------------------
Initializing the configuration information
You can initialize the network settings (to the factory defaults), reset the controller, and delete the entire destination information.
1-Network Setting Clear:
In the administrator mode of PageScope Web Connection, select "Maintenance" - "Reset" - "Network Setting Clear".
(If Enhanced Security Mode is enabled, this menu item will not be displayed.)
*If you click [Clear], the network settings of this machine are cleared to the factory defaults.
2-Reset:
In the administrator mode of PageScope Web Connection, select "Maintenance" - "Reset" - "Reset".
*If you click [Reset], the controller is reset.
----------------------------------------------------------------------------
Yes Stirton.M
We are running external copy and print control software on device but we are unable to control the +452 at present as some IT guy changed alot of details
Thanks
Bookmarks