How to reset a network card in a C452

[jrf]

Hi guys, I have a C452 which i need to reset all network settings on. Anybody know how?

[jma676]

Check: User's Guide (Network Administrator)

[RRodgers]

Check: User's Guide (Network Administrator)

Hit utility, admin mode, put in admin password then hit network setting, the tcp ip setting. Set them for what ya need and reboot.
That should do it.

[jrf]

Thanks but I need to reset all settings to default on NIC

[Stirton.M]

And to do that you go into Administrator and access the network settings and erase any and all settings within that.

Is there any particular reason you want to reset these?

[jma676]

Hit utility, admin mode, put in admin password then hit network setting, the tcp ip setting. Set them for what ya need and reboot.
That should do it.

Thanks Rogers, but I do not ask anything, the other boy (jrf) is concerned.

[Konica_jr]

more radical, use the stools !

[mitchl]

The only way to clear a NIC that I know of is to use the NVRAM recovery tool that you install on the flash card, it gives you 2 options when in the machine one to reset the NIC and the other is to recover NVRAM...... Might want to give that a whirl.

[jma676]

Hi guys, I have a C452 which i need to reset all network settings on. Anybody know how?

as I said before:Check: User's Guide (Network Administrator)

You, Maybe, not compose well the question, or want to refer to something else, ooooh... read the manual, if you want to restore any settings, just do it, you want to configure the IP address again, between a new and longer.

Anyway.
-------------------------------------------------------------------------------
Initializing the configuration information

You can initialize the network settings (to the factory defaults), reset the controller, and delete the entire destination information.


1-Network Setting Clear:


In the administrator mode of PageScope Web Connection, select "Maintenance" - "Reset" - "Network Setting Clear".

(If Enhanced Security Mode is enabled, this menu item will not be displayed.)

*If you click [Clear], the network settings of this machine are cleared to the factory defaults.



2-Reset:


In the administrator mode of PageScope Web Connection, select "Maintenance" - "Reset" - "Reset".

*If you click [Reset], the controller is reset.
----------------------------------------------------------------------------

[jrf]

And to do that you go into Administrator and access the network settings and erase any and all settings within that.

Is there any particular reason you want to reset these?

Yes Stirton.M
We are running external copy and print control software on device but we are unable to control the +452 at present as some IT guy changed alot of details
Thanks

• View Profile
• View Forum Posts
• Private Message
• Add as Contact
• Send Email