I have a question, i'm trying to figure out what's wrong with my Konica 362 copier. the 0x0000999a code abort message keeps showing up every few minutes when the copier is connected to the network cable. The power would abort and power off and on within a minute. It happens constantly, every 3 minutes or so. It's very frustrating. When the copier is not connected to the network cable it seems to be fine (but i never stood more than 30 minutes looking at the copier). The konica tech has upgraded the firmware, change the circuit board, and the memory card but it still does the same thing. between him and the copier engineer, they said someone in the building has a corrupt file on their computer and it's causing that. my network service folks has checked the network connection and it's clean. The tech said that he needs to go to everyone's computer and see if they have a corrupt file. We have hundreds of people using that copier...also how would he even know if they have a corrupt file? it doesn't make sense to me. Anyone have this problem before? thanks.
Bookmarks