It showed paper jam, first, there was no paper, I cleaned the sensor, didn't help, I replaced it with another one, and I'm having sc30-10. Any solution?
Thanks: 0
Likes: 0
Dislikes: 0
It showed paper jam, first, there was no paper, I cleaned the sensor, didn't help, I replaced it with another one, and I'm having sc30-10. Any solution?
Replace the conveyance drive board (CDB) in the ADU section.
It helps to search in the forum too by the way...
SC 30-10
"Many years ago I chased a woman for almost two years, only to discover that her tastes were exactly like mine: we both were crazy about girls."
---Groucho Marx
Please do not PM me for questions related to Konica Minolta hardware.
I will not answer requests or questions there.
Please ask in the KM forum for the benefit of others to see the question and give their input.
]Originally Posted by Stirton.M
Thanks will try, search is not the gratest, that is way posted this one.
Changed the board still have the same problem
Am I reading the process correctly?
1 machine showed a jam
2 cleaned sensor but machine still showed same jam
3 changed sensor and problem went to SC30-10
My thought process is that you may have installed an incorrect sensor that is popping the ICP on the Conveyance drive board.
Have you checked the ICPs on the board that you removed?
don't know how to check ICPs
There are several ICPs on every board in these machines. ICP or integrated circuit protector...fancy name for FUSE...
These look like small surface mounted capacitors on the boards. Actually, they are slightly larger than most surface mount semi's. Mostly they are white packages, though sometimes they can be black. The board silk screen should be clearly marked as to the ICP, along with the number to be specific to each one. To test the ICPs, simply put a multimeter across them to check for continuity (tone type meters make this easy). If they are open, that ICP is blown and needs to be replaced.
"Many years ago I chased a woman for almost two years, only to discover that her tastes were exactly like mine: we both were crazy about girls."
---Groucho Marx
Please do not PM me for questions related to Konica Minolta hardware.
I will not answer requests or questions there.
Please ask in the KM forum for the benefit of others to see the question and give their input.
ok didn't check them yet, but I put everything back the same way it was telling me there is a paper jum, still 30-10, changed the board, no different whatsoever
Is it a service code SC30-10 or is it a jam J30-10?
service code sc30-10
Posting Permissions
Reply With Quote
Bookmarks