Are they still sending the C203 printheads in four-packs or is it possible already to order just one? If so, what's the pn for one ph?
Cheers!
Are they still sending the C203 printheads in four-packs or is it possible already to order just one? If so, what's the pn for one ph?
Cheers!
' "But the salesman said . . ." The salesman's an asshole!'
Mascan42
'You will always find some Eskimo ready to instruct the Congolese on how to cope with heat waves.'
Ibid
I'm just an ex-tech lurking around and spreading disinformation!
If you're a dealer you should be able to get the FOC replacement kits which are all 4. I believe you may have issues replacing just 1 as the PHs are a matched set. Emujo
They come in a set of four. But you can just change the faulty one, and keep the three back for spares. We have done this quite a few times in the past as Konica Minolta are often sort of stock.
' "But the salesman said . . ." The salesman's an asshole!'
Mascan42
'You will always find some Eskimo ready to instruct the Congolese on how to cope with heat waves.'
Ibid
I'm just an ex-tech lurking around and spreading disinformation!
After you change any laser unit you can use an special firmware for this machine to solve the laser error code and see if an error code reappear or not.
Ok, Iīm sorry for the mistake but I donīt speak english very much.
Hello
It is not possible to order one by one the hole order must be of four.
See attach file!!!
bizhub_c203_c253_c353_A02E_pagenumber.046.jpgbizhub_c203_c253_c353_A02E_pagenumber.045.jpg
How did I miss this originally? I must've been sleeping....
A02E R702 11 FOC
That said, I recommend you change 4 as a set if you do the FOC program, though I think that has expired. See this post for my post on the subject....
Bizhub C200 with C4153 error code
The reason being, is there is a high likelihood that the remaining laser units may fail at some point and you will be forced to do the replacement again. This can be a major hassle as you no doubt already know, when replacing a unit.
It is your choice however...
"Many years ago I chased a woman for almost two years, only to discover that her tastes were exactly like mine: we both were crazy about girls."
---Groucho Marx
Please do not PM me for questions related to Konica Minolta hardware.
I will not answer requests or questions there.
Please ask in the KM forum for the benefit of others to see the question and give their input.
Bookmarks