Thanks Stirton,
I did not restart the machine after making the adjustment, I give that a try on monday! Thanks
Thanks Stirton,
I did not restart the machine after making the adjustment, I give that a try on monday! Thanks
Here is tech pub tech 51 was referring to earlier in this thread, don't know if you got this issue resolved yet.
Subject:
Copies, prints and internal test prints are washed out or grainy.
Description:
Copies, prints and internal test prints are washed out or grainy.
Solution:
CAUSE: A failed service EEPROM board.
Note: Image on the transfer belt is OK. Under level history 2 in Service mode, ATVC 2nd will not read higher than 300V DC after a print or copy job is finished.
SOLUTION: Replace the PWB-EE Assembly (p/n A00J H00C 00 for bizhub C451/C550/C650 and p/n A0P0 H00C 00 for bizhub C452/C552/C652). Please read the attached documents for special instructions when replacing the service EEPROM. To view a PDF, you may need to download a free copy of Adobe Reader®.
bizhub, have you seen this issue before? I read the service manual which said I needed to replace all the cosumables to do this! Can I just rechip instead? or can I just throw it in and make the adjustments. Thanks
I don't see why a guy could not rechip the IU's.
can someone send me the tech pub. that covers the replacment of the PWB-EE Assembly.
Thanks
thanks, everybody for all your asst. on this problem! I replaced the PWB-EE Assembly today and it fixed the problem, Yeah! I didn't have to replace any components, the life was very good on most items. I set most of the adjustments to their original settings and everything looks good, I do have to return to make some centering adjustments but the customer is happy!
Problem resolved!
Nice to hear from you! Thanks for the feedback!
' "But the salesman said . . ." The salesman's an asshole!'
Mascan42
'You will always find some Eskimo ready to instruct the Congolese on how to cope with heat waves.'
Ibid
I'm just an ex-tech lurking around and spreading disinformation!
Bookmarks