When I send a print job to the c450 the data light blinks and the job never prints. This just started happening, any ideas?
When I send a print job to the c450 the data light blinks and the job never prints. This just started happening, any ideas?
What does it say in the job history? Is Account Track or Authentication enabled?
Online Store is closed. Chip resetting is a thing of the past! Thank you to all my past customers.
Now into Ip TV KODI Boxes
Or the job has been printed to a user/system box or secure print
"Many years ago I chased a woman for almost two years, only to discover that her tastes were exactly like mine: we both were crazy about girls."
---Groucho Marx
Please do not PM me for questions related to Konica Minolta hardware.
I will not answer requests or questions there.
Please ask in the KM forum for the benefit of others to see the question and give their input.
There is nothing in job history and acct. track and auth enable are both off.
Secure print is not being used.
Maybe this is one for the NVRAM/NIC-reseting firmware-thingie?
' "But the salesman said . . ." The salesman's an asshole!'
Mascan42
'You will always find some Eskimo ready to instruct the Congolese on how to cope with heat waves.'
Ibid
I'm just an ex-tech lurking around and spreading disinformation!
Or just a wipe of the settings in tech rep, re-enter all the settings and so forth will correct it.
Might even be something as stupid simple as a poor network connection or failing port on a router.
"Many years ago I chased a woman for almost two years, only to discover that her tastes were exactly like mine: we both were crazy about girls."
---Groucho Marx
Please do not PM me for questions related to Konica Minolta hardware.
I will not answer requests or questions there.
Please ask in the KM forum for the benefit of others to see the question and give their input.
Try printing to it with a crossover cable first.
Try a firmware update second.
Try a Data Clear third.
Report back!
It will not print anything
Bookmarks