HI every one,
I have a Konica Copier and recently a error came up.
The error code is F-35-1, Guys i would really appreiciate if you could help me out.
Thankz
HI every one,
I have a Konica Copier and recently a error came up.
The error code is F-35-1, Guys i would really appreiciate if you could help me out.
Thankz
Fuser error, here is the reset procedure.
Set SW2 (sub
power switch)
OFF and then
back ON, after set
to "0" the bit 1 in
DIP SW3 in 25
mode. (If you
switch power back
on without
releasing the
latch, the error will
recur.)
Bookmarks