What is procedure for removing "contact section" on bizhub C252. I need to change contact (P/N: 4038 2222 01).
What is procedure for removing "contact section" on bizhub C252. I need to change contact (P/N: 4038 2222 01).
Pretty much remove everything on the backside. Be careful of the two ribbon cables on the right side of the control board cage. Looking from the back, the left side plastic panels (the one covering the cage and the other covering the scanner unit, must be removed. Upper rear panel removed. Both fan ducts above the cage removed. The cage itself removed. The rest I cannot recall specifically, but it should be pretty obvious from that point on what you need to remove to achieve what you need to do.
"Many years ago I chased a woman for almost two years, only to discover that her tastes were exactly like mine: we both were crazy about girls."
---Groucho Marx
Please do not PM me for questions related to Konica Minolta hardware.
I will not answer requests or questions there.
Please ask in the KM forum for the benefit of others to see the question and give their input.
Bookmarks