c280 magenta problem

[stevelau]

Is the magenta test print from the test mode? If from the test mode it is normal if you reduce the density. Did you try to pump in toners(CMYK) and do the gamma adj?

[Z1PP0]

yes in first post magenta prints are from test mode. first print is magenta density 255, second density 60 and third is lattice patern revers density 60

[stevelau]

All machine using transfered belt will have this type of uneven. Suggest you service the transfered belt(especially the cleaning blade) and check is the life span due. Sometimes after servicing the transfered belt and pump in toners(CMYK). the print will improves.

[stevelau]

if that the cas,e there is nothing wrong with your magenta unit. Do concentrate on your transfered belt and do some service on it.