Thanks:
0
Likes:
0
Dislikes:
0
-
Technician
- Rep Power
- 34
di 200f
i keep getting a c0500 code(low fuser temp at warm up) at random times. i do a trouble reset and the its ok for about a day. have replaced A board and thurmister. any suggestions???
-
Village Idiot
500+ Posts
- Rep Power
- 42
Have you changed the fuser lamp? I have seen them give this kind of trouble in this model - even if they look OK.
-
Wagon is right, the lamp contacts tend to corrode
-
Technician
250+ Posts
- Rep Power
- 36
i Agree the contact does give problems , you can however also check to see if the door closes properly , if you take of the front cover , that is normally the cover with the model name written on it you will see a black switch that is made when the door closes so check to see if this switch is made properly or even replace it. p.s i think the di 200 is the same as the
di 250 since we do not have the di200 in south africa.
-
Village Idiot
500+ Posts
- Rep Power
- 42
The Di200 is similar to the Di251/351. It is a later machine to the Di250/350. The image unit is the same but the fuser (and a lot else) is different. But the lamps do give those errors!
Kendall.
-
Technician
- Rep Power
- 34
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Bookmarks