Thanks Thanks:  0
Dislikes Dislikes:  0
Page 1 of 2 12 LastLast
Results 1 to 10 of 11
  1. #1
    Senior Tech 250+ Posts
    Join Date
    Mar 2009
    Posts
    287
    Rep Power
    35

    Bizhub C353 boot up problem

    Hi
    I have one C353 which displays only Sand Glass after power ON. Machine rotates but nothing happens further.
    Reloaded firmware still same symptons.
    Any known solutions before testing MFP board, Power supply unit.

    Thanks & Best Regards
    Ajit
    Last edited by AjitN; 03-19-2011 at 04:06 AM.

  2. #2
    Technician
    Join Date
    Mar 2011
    Posts
    17
    Rep Power
    27
    i think its an nvram malfunction.

  3. #3
    Technician
    Join Date
    Jul 2010
    Posts
    21
    Rep Power
    28
    Try changing the NVRAM. If still cannot, try to flush out the firmware and reload.

  4. #4
    Technician bhangdu's Avatar
    Join Date
    Nov 2010
    Posts
    16
    Rep Power
    28
    I had a same problem, i have run the nvram recovery special firmware on the machine

  5. #5
    Senior Tech 250+ Posts
    Join Date
    Mar 2009
    Posts
    287
    Rep Power
    35
    Thank you friends.
    I do not have nvram recovery special firmware tool. Does it named as "A02E0Y0-F000-GCQ-J8_00_.EXE".
    If this is the file I have it but if not, can anybody tell me where to find the same.

    Best Regards & Thanks again
    Ajit

  6. #6
    Technician bhangdu's Avatar
    Join Date
    Nov 2010
    Posts
    16
    Rep Power
    28
    [Release version]
    <C650/C550/C451/C353/C253/C203 jig firmware>
    Model
    Program Name
    Ver.
    Program File Name
    Checksum
    Note
    bizhub C650
    Jig firmware
    GCQ-J8
    A00H0Y0-F000-GCQ-J8(00).EXE
    0E9A

    bizhub C550
    Jig firmware
    GCQ-J8
    A00J0Y0-F000-GCQ-J8(00).EXE
    8E57

    bizhub C451
    Jig firmware
    GCQ-J8
    A00K0Y0-F000-GCQ-J8(00).EXE
    7D69

    bizhub C353
    Jig firmware
    GCQ-J8
    A02E0Y0-F000-GCQ-J8(00).EXE
    91B0
    bizhub C253
    Jig firmware
    GDQ-J8
    A02E0Y0-F000-GDQ-J8(00).EXE
    9139
    bizhub C203
    Jig firmware
    GEQ-J8
    A02E0Y0-F000-GEQ-J8(00).EXE
    AFA0



    Cheers
    Abhay

  7. #7
    Senior Tech 250+ Posts
    Join Date
    Mar 2009
    Posts
    287
    Rep Power
    35
    Hi
    Problem is resolved by nvram initialization.

    Thanks and best regards to all
    Ajit

  8. #8
    Mike Lee
    Guest

    Exclamation C253 Planets screen

    Ineo C253 planets showing.
    Flashed firmware.
    Tried Memory chips.
    NVRAM ok.
    MFP pcb changed.
    Still same fault.
    Changed PRCB PCB and flashed firmware again and now finally works !

  9. #9
    bizpodcentre
    Guest

    Re: Bizhub C353 boot up problem

    Hi,

    I also have the same problem but on Konica Minolta Bizhub C253. Does anybody
    have the NVRAM recovery file for bizhub C253? You can email the file to me
    at bizpodcentre@yahoo.com


    thanks

  10. #10
    Trusted Tech 50+ Posts mervyn's Avatar
    Join Date
    Jul 2011
    Location
    Florida
    Posts
    90
    Rep Power
    27

    Re: Bizhub C353 boot up problem

    As previously ststed on various posts here , if you are a trained konica minolta tech you can get the firmware on the kmbs tech website , if not then call a trained tech . No one is going to e mail you the nvram recovery program , it is against kmbs policy .

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here