Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 7 of 7
  1. #1
    Trusted Tech 50+ Posts
    Join Date
    Dec 2009
    Posts
    83
    Rep Power
    16

    konica bh 350 boots to logo screen please wait then to logo screen

    hello everone,
    after changing ip address of machine, it ask to reboot copier, so I did, now it goes to
    that screen, I am going to try to reinstall firmware, can a 4gig compact flash be use
    for this or it must be 128mg. Appreciate any suggestions Thanks in advance


  2. #2
    Technician
    Join Date
    Jul 2010
    Posts
    21
    Rep Power
    15
    128MB will be better but have not tried 4G...


  3. #3
    Trusted Tech 50+ Posts
    Join Date
    Dec 2009
    Posts
    83
    Rep Power
    16
    Thank you Steve for your input. I got a hold of the scandisk 128mg and copy just the firmware files to it, but when I tried to boot from the flash card, nothing happens. According to the manual, I shut down the machine with the main switch, I then insert card,
    turn subpower on, then main power. Can someone verify if this is correct. Also does the copier need an old firmware in the machine to update the firmware to a newer version. Thank you


  4. #4
    Senior Tech 100+ Posts
    Join Date
    Jul 2010
    Location
    vizag
    Posts
    106
    Rep Power
    0
    if u instal firm ware with 128mb cf card ,is it ok.if not u have to instal nvram also.


  5. #5
    Senior Tech 100+ Posts
    Join Date
    Aug 2008
    Posts
    128
    Rep Power
    0
    if the machine did not start the firmware installation, maybe ur CF card is not compatible (low posibility). i have reflash my Bizhub250 with the step below,
    off the machine, insert the CF card, then switch all the power switch ( main switch and sub-switch) to ON position, then only power On the machine from the power source from the wall plug. this method never fail me.


  6. #6
    Senior Tech 250+ Posts
    Join Date
    Jan 2009
    Location
    UK
    Posts
    484
    Rep Power
    23
    Quote Originally Posted by ameritech View Post
    Thank you Steve for your input. I got a hold of the scandisk 128mg and copy just the firmware files to it, but when I tried to boot from the flash card, nothing happens. According to the manual, I shut down the machine with the main switch, I then insert card,
    turn subpower on, then main power. Can someone verify if this is correct. Also does the copier need an old firmware in the machine to update the firmware to a newer version. Thank you
    Make sure the cf card is formatted in fat 16 or fat before copying files on to it. The machine will not recognise a card formatted in Fat 32 or ntfs...


  7. #7
    Service Manager 250+ Posts
    Join Date
    Jan 2010
    Location
    Sydney
    Posts
    360
    Rep Power
    19
    Quote Originally Posted by ameritech View Post
    hello everone,
    after changing ip address of machine, it ask to reboot copier, so I did, now it goes to
    that screen, I am going to try to reinstall firmware, can a 4gig compact flash be use
    for this or it must be 128mg. Appreciate any suggestions Thanks in advance
    format your CF card using KM Firmware Imaging toolkit.


Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •