Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 8 of 8

Thread: C203 problem

  1. #1
    Trusted Tech 50+ Posts
    Join Date
    Jul 2009
    Location
    Brčko
    Posts
    54
    Rep Power
    30

    C203 problem

    have a problem with bizhub C203. When printing machine works great, but when copying a problem occurs. when the image is scanned to the computer also the problem does not occur even when the scanned image to print release all is well.


    print.jpgcopy.jpg


  2. #2
    Tom40
    Guest
    It seems that PWB-MFP is faulty.

  3. #3
    Tecnico 250+ Posts acusso1234's Avatar
    Join Date
    Dec 2008
    Location
    Milano, Italia
    Posts
    250
    Rep Power
    34
    When you make the copy how you set up the job? Do you use text, text and photo or photo?
    ... In the minute that you're thinking of giving up, think about why you lasted so long ...

  4. #4
    Field Supervisor 1,000+ Posts RRodgers's Avatar
    Join Date
    Jun 2009
    Location
    San Bernardino
    Posts
    1,951
    Rep Power
    56
    NEVER copy the test charts that come out of the machine. They NEVER look right and will throw you threw loops. Just be sure to clean the optics... do a reset and stablize and then calibration.
    Color is not 4 times harder... it's 65,000 times harder. They call it "TECH MODE" for a reason. I have manual's and firmware for ya, course... you are going to have to earn it.

  5. #5
    Trusted Tech 50+ Posts
    Join Date
    Dec 2010
    Location
    Denver, Colorado; St Louis Mo.
    Posts
    70
    Rep Power
    0
    I agree with RRodgers don't copy the machine generated test prints they will lead you astray. Run stabilize/reset, and do the 3 gradation adjusts at least 3 times each as the book says most color problems are fixed with this method and as RR says don't forget the optics (they do get dirty) most of the other problems I have are because we are forced to reset counters for the image units and transfer belt instead of replacing them when time is up.

  6. #6
    Field Service Manager 1,000+ Posts
    C203 problem

    pepper38_cnd's Avatar
    Join Date
    Aug 2005
    Location
    Windsor, ON Canada
    Posts
    1,073
    Rep Power
    51
    Make sure the customer hasn't gone into admin mode and changed the default copy settings. That would explain why it is only copying that you have the problem.
    Online Store is closed. Chip resetting is a thing of the past! Thank you to all my past customers.
    Now into Ip TV KODI Boxes

  7. #7
    Trusted Tech 50+ Posts
    Join Date
    Jul 2009
    Location
    Brčko
    Posts
    54
    Rep Power
    30
    The first thing I did is clean optics. Then I worked stabilization and initialization, calibration, but nothing. As for copying test charts .... the same is happening on any other page copied in color. I tried with FirmWare but nothing.
    Imaging Units are almost new.
    Today I appeared in code C4552 laser malfunction M

  8. #8
    Field Supervisor 1,000+ Posts RRodgers's Avatar
    Join Date
    Jun 2009
    Location
    San Bernardino
    Posts
    1,951
    Rep Power
    56
    Double check the scanner cable, although when that had a a bent pin you usually have a problem with yellow.
    Color is not 4 times harder... it's 65,000 times harder. They call it "TECH MODE" for a reason. I have manual's and firmware for ya, course... you are going to have to earn it.

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here