Bizhub C350 Service Mode

[tmanamore]

How do i get into the service mode on a Konica Minolte Bizhub C350?

[Valeo175]

Hit the stop 0-0 stop 0 -1

[tmanamore]

That didn't work. Anything else I can try?

[CT Copier Repair]

Yea don;t post this stuff in the publicly viewed areas
send it via private message

[pakalo]

Ciao,
Per entrare nel Tech. Rep. Mode premere:

Utility->Contatore->Stop->0->0->Stop->0->1

Per il TROUBLE continuare da qui premendo:

Stop->9->Stop->0->Stop->1

Ciao.

[da2or]

Yea don;t post this stuff in the publicly viewed areas
send it via private message

I'm having the same issue. Unable to get into service mode due to error c-d010. I must be missing something as I have tried a few things to get in to service. I cannot get past the first screen, so I'm looking for a power up solution! Thanks, if you can help!

[CT Copier Repair]

I guess that if we can't read italian its ok

DOn't post this in forums
come on guys its not that difficult

B

[da2or]

My problem is when I power up with the utility key held for a Trouble Reset and I enter in my service code, I see the flash of the CE Service password screen, but then it returns to the error screen before I can enter in the password. So I am having a tough time just getting in. Anyone have any suggestions? Thanks

[tritwi]

Hit Utility key then counter then counter details then stop 00 stop 01

[chrisban35]

Hit Utility key then counter then counter details then stop 00 stop 01

Now that I am in, what is the password? I'm normally a Canon and Xerox tech, so need some help guys. Thanks in advance.