Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 7 of 7
  1. #1
    Junior Member
    Join Date
    Apr 2011
    Posts
    5
    Rep Power
    0

    Develop ineo+253 alias KM c253 don't start

    I have a problem with this copier
    After a blackout it don't boot anymore
    I only got an hour glass screen
    I've just unplugged all the boards and unplugged the SODIMM without success
    In the main board there is a fix red led
    What could be?
    Sorry for my english that it's not perfect
    Thank'you for cooperation


  2. #2
    Technician rprem's Avatar
    Join Date
    Apr 2009
    Location
    Coimbatore,Tamilnadu
    Posts
    49
    Rep Power
    0
    nv ram problem reinstall it problem will be solved

    Head Lines Are Made When Dead Lines Are Met

  3. #3
    Junior Member
    Join Date
    Apr 2011
    Posts
    5
    Rep Power
    0
    How can I do?
    Are you talking about the NVRAM reset software?


  4. #4
    Junior Member jamesmutz's Avatar
    Join Date
    Apr 2011
    Location
    Gold Coast, Qld
    Posts
    6
    Rep Power
    0
    Couple things to try. First just try updating the firmware. If that doesn't work, try the special NVRAM reset firmware. If still no go you'll have to replace the NVRAM board.


  5. #5
    Trusted Tech 50+ Posts boanda's Avatar
    Join Date
    Feb 2011
    Posts
    79
    Rep Power
    0
    Just use special firmware for "hourglass" problem


  6. #6
    Junior Member
    Join Date
    Apr 2011
    Posts
    5
    Rep Power
    0
    Thanks to all
    Problem solved using JIG Firmware and NVRAM recovery card
    See you
    Giuseppe


  7. #7
    Junior Member
    Join Date
    Mar 2016
    Posts
    2
    Rep Power
    0

    Unhappy Re: Develop ineo+253 alias KM c253 don't start - I have the same problem

    I know this is an old thread, but I have the same issue on my (home based) Ineo+253. It happened after the machine turned on/off a few times due to a loose power cable.

    I had someone in to look at the machine today, he informed me that he thought the main board was faulty and I would be better off getting a new machine.
    No attempt to re-flash or reset NVRAM, just a few power on/offs and thanks for the call out charge I know, everyone needs to pay the bills!

    Is the NVRAM reset firmware still available for this machine? I have the service manual, I have CF cards of the correct size (256MB).

    I just need someone in the Cambridge area who has access to the firmware and knows how to installed it / reset the NVRAM. I am not looking for
    a freebie, I just cannot find anyone who appears to know about this machine.

    PM me if you can help / know of anyone.

    I really don't want to skip an otherwise perfectly good machine.

    Thanks
    Karl


Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •