Konica M. C350

[chairsurvivor]

I am trying to network my Bizhub c350 to my computer but some of my menu options are missing on the printer. Is there a special network mode or service mode I need to go in to first to access these options. Or can I reset the factory settings? Thanks K.B.

[chairsurvivor]

I've found the service mode but I still am unable to access the network features of my machine, any thought shoot me a message.

[Dexor]

This post may be helpful. I'm having similar issue via my partner, but haven't been @ the machine myself yet:
Bizhub C350 with Fiery x3e 22c-KM

Let me know how you're making out, or perhaps you solved the problem long time ago?

[TheOwl]

If you are missing alot of network options on the machine, then it does sound like you have a Fiery X3e attached. To set this up for the network you will need to get into the Fiery menu by using the following:

1. Utility
2. Controller Details

Before you go looking for this menu, ensure that you have a cream / white coloured box screwed on the back of the machine with a cable coming out of it going into the right hand side of the machine.