Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 8 of 8
  1. #1
    Senior Tech 100+ Posts
    Join Date
    Apr 2010
    Location
    Porto Portugal
    Posts
    144
    Rep Power
    30

    Biz C6500 error code C-3913

    Hello people
    occasionally this error drops...everything seems fine
    any idea?
    Thanks

  2. #2
    Service Manager 5,000+ Posts
    Biz C6500  error code C-3913


    Join Date
    Jan 2006
    Location
    Las Vegas, NV
    Posts
    9,940
    Rep Power
    153
    This Parts & Service manual can now be purchased for $12.77 and downloaded immediately after payment from
    Just Manuals | The Internet's largest selection of manuals | Instant Downloads


    Paul@justmanuals.com

  3. #3
    Senior Tech 100+ Posts
    Biz C6500  error code C-3913

    bizhub1's Avatar
    Join Date
    Sep 2008
    Posts
    230
    Rep Power
    34
    Make sure the fuser unit screw is in place and the fuser is not moving when put in the machine, check the connectors

  4. #4
    Technician
    Join Date
    Sep 2010
    Posts
    30
    Rep Power
    28
    I had this same code about a month ago. The pins in the connector had become compressed over time and were not making good connection. If you have a steady hand, a jeweler's screwdriver can pull them out slightly to make a better connection.

  5. #5
    Technician engineer's Avatar
    Join Date
    May 2011
    Location
    jakarta
    Posts
    19
    Rep Power
    27
    Check the fusing position, check all connector, make sure everything oke, and doing this adjustment:
    Utility => Stop => 0 => Stop => 0 => 0 => 1. This is to prevent accidental reset of the code and causing additional damage to the machine. To reset a fuser abnormality code, perform the following:
    1. Power the machine OFF from the main switch leaving the sub switch ON.
    2. Press the utility Key and power ON the machine from the main switch.
    3. Enter Stop => 0 => 0 => Stop => 0 => 1.
    4. Press [03 System Setting] on the touchscreen. 5. Press [01 Software SW setting] on the touchscreen.
    6. Press the left up-arrow, which is displayed on the touchscreen, 2 times. The number displayed above the up-arrow will change to 03.
    7. Select the bit number of switch 1, using the right up-arrow, 03-1 will be indicated.
    8. Press the [Return] key, which is displayed on the touchscreen.

  6. #6
    Junior Member
    Join Date
    Jul 2016
    Location
    Nairobi Kenya
    Posts
    2
    Rep Power
    0

    Re: Biz C6500 error code C-3913.

    Quote Originally Posted by engineer View Post
    Check the fusing position, check all connector, make sure everything oke, and doing this adjustment:
    Utility => Stop => 0 => Stop => 0 => 0 => 1. This is to prevent accidental reset of the code and causing additional damage to the machine. To reset a fuser abnormality code, perform the following:
    1. Power the machine OFF from the main switch leaving the sub switch ON.
    2. Press the utility Key and power ON the machine from the main switch.
    3. Enter Stop => 0 => 0 => Stop => 0 => 1.
    4. Press [03 System Setting] on the touchscreen. 5. Press [01 Software SW setting] on the touchscreen.
    6. Press the left up-arrow, which is displayed on the touchscreen, 2 times. The number displayed above the up-arrow will change to 03.
    7. Select the bit number of switch 1, using the right up-arrow, 03-1 will be indicated.
    8. Press the [Return] key, which is displayed on the touchscreen.
    .....
    I have done this reset Immediately it brings error code 3913 (Konica Minolta 6500) even when the fuser unit is out. what could be the problem? kindly assist. ~ BenPapa~

  7. #7
    Junior Member
    Join Date
    Sep 2018
    Location
    Harrisonburg
    Posts
    1
    Rep Power
    0

    Re: Biz C6500 error code C-3913

    We got rid of this error and 3806, 3901, 3501 by cleaning the plug on the back of the fuser but spraying it with contact cleaner followed up by spraying it with canned air to get out any moisture. Worked like a champ after quite a bit pulling our hair out and lots of restarting to reset DipSW3-1.

  8. #8
    Field Supervisor 500+ Posts
    Biz C6500  error code C-3913

    tulintron's Avatar
    Join Date
    Jul 2014
    Location
    Belo Horizonte, Minas Gerais
    Posts
    641
    Rep Power
    32

    Re: Biz C6500 error code C-3913.

    This error is caused by poor connection of the fuser to the printer body.
    Check for errors in this rationale.
    Not required 03-1 to off

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here