Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 8 of 8
  1. #1
    Junior Member
    Join Date
    Apr 2011
    Location
    Marietta
    Posts
    3
    Rep Power
    0

    Question Konica Minolta 8050- SC41-02 error code. Any suggestions?

    I just got a call about this and have no idea where to start.

    Anyone have a service manual or know what the error means?

    Any help would be appreciated.




  2. #2
    Field Supervisor 500+ Posts Luther's Avatar
    Join Date
    May 2006
    Location
    crystal lake ,Illinois
    Posts
    605
    Rep Power
    31
    yellow polygon motor failure


  3. #3
    Junior Member
    Join Date
    Apr 2011
    Location
    Marietta
    Posts
    3
    Rep Power
    0
    Thanks for the reply Luther,

    From what I can put together it sounds like 41 error is a failed write/laser unit or suction/exhaust fan.
    the second part, 02, indicates the color.

    "yellow polygon motor failure"
    Is the motor inside the laser unit or is it a single part that can be replaced?


  4. #4
    Field Supervisor 500+ Posts Luther's Avatar
    Join Date
    May 2006
    Location
    crystal lake ,Illinois
    Posts
    605
    Rep Power
    31
    it comes as a unit...i dont know if you can lube the shaft on the motor you can try it


  5. #5
    Field Supervisor 500+ Posts Luther's Avatar
    Join Date
    May 2006
    Location
    crystal lake ,Illinois
    Posts
    605
    Rep Power
    31
    and i think 42 codes are fan codes, 41 codes are write unit codes and the sub code tells you the color, its either a failed write unit or the printer control board...good luck


  6. #6
    Service Manager 10,000+ Posts
    Konica Minolta 8050- SC41-02 error code. Any suggestions?

    JustManuals's Avatar
    Join Date
    Jan 2006
    Location
    Las Vegas, NV
    Posts
    10,041
    Rep Power
    141
    This Parts & Service manual can now be purchased for $12.77 and downloaded immediately after payment from
    Just Manuals | The Internet's largest selection of manuals | Instant Downloads


    Paul@justmanuals.com



  7. #7
    Service Manager 100+ Posts
    Join Date
    Feb 2011
    Location
    Brasov
    Posts
    229
    Rep Power
    0
    Hi!

    I had the same problem with a Bizhub Pro C500 - almost the same machine and I only cleaned very vell the exhausting fans from the writing units and all the path of the air from around them. I did this about 3 weeks ago and the machine still works fine, no problems...


  8. #8
    Trusted Tech 50+ Posts
    Join Date
    Feb 2011
    Location
    Marshville, NC
    Posts
    95
    Rep Power
    14

    Re: Konica Minolta 8050- SC41-02 error code. Any suggestions?

    Bringing up an old thread with a question. It's May12 and it's back to some serious heat in my non-air conditioned house. Coult this error just be a normal condition from a C-500 idling several hours? I turned off the machine for 15 minutes and when I turned it back on the error was gone. Thank you.


Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •