Ive tried the control panel and the wiring. Ive also checked all the connectors.
You can just make out the display, its as though the bulb has gone.
Thanks in advance
Ive tried the control panel and the wiring. Ive also checked all the connectors.
You can just make out the display, its as though the bulb has gone.
Thanks in advance
have you tried to replace the control panel? or tried to repair it ?....
Yes and the wiring, disconnected and reconnected all connectors on PWB's... Still no joy..
Either the display is gone (the backlight is fried) or the inverter board is at fault.
' "But the salesman said . . ." The salesman's an asshole!'
Mascan42
'You will always find some Eskimo ready to instruct the Congolese on how to cope with heat waves.'
Ibid
I'm just an ex-tech lurking around and spreading disinformation!
This Parts & Service manual can now be purchased for $12.77 and downloaded immediately after payment from
Just Manuals | The Internet's largest selection of manuals | Instant Downloads
Paul@justmanuals.com
Ive tried another Control Panel from another machine that was working.. The Invertor board was on the control panel.
Thanks
So it was a failed inverter board. Nice to know you solved it.
Cheers!
' "But the salesman said . . ." The salesman's an asshole!'
Mascan42
'You will always find some Eskimo ready to instruct the Congolese on how to cope with heat waves.'
Ibid
I'm just an ex-tech lurking around and spreading disinformation!
No its not fixed, just stating that the invertor was on the control panel that i swoppped.
Sorry for the mix up...
' "But the salesman said . . ." The salesman's an asshole!'
Mascan42
'You will always find some Eskimo ready to instruct the Congolese on how to cope with heat waves.'
Ibid
I'm just an ex-tech lurking around and spreading disinformation!
A minute to write this on one of yours to give a look at the scanner cable down silver connection..
... In the minute that you're thinking of giving up, think about why you lasted so long ...
Bookmarks