Thanks:
0
Likes:
0
Dislikes:
0
-
Technician
- Rep Power
- 25
Re: C-2454 Errroe on bizhub c6500
I dont know how old this developer,
what's happen if the error change to the developer I swap?
regards
-
Senior Tech
100+ Posts
- Rep Power
- 0
Re: C-2454 Errroe on bizhub c6500
if the error code change, than it might be 2 things, toner density sensor, or developer powder, what you can try to swap sensors, just don't forget to tape the tanks, because you will have to turn them, if that won't help, you would have to change the developer.
-
Technician
- Rep Power
- 25
Re: C-2454 Errroe on bizhub c6500
for c2453, cyan toner I swap with magenta, it still appears c2453, not change to 2452.... what's that means?
for black toner, I swap with yellow, both are error... I don't know why
Regards
-
Senior Tech
100+ Posts
- Rep Power
- 0
Re: C-2454 Errroe on bizhub c6500
Not toner, developer unit
-
Senior Tech
100+ Posts
- Rep Power
- 0
Re: C-2454 Errroe on bizhub c6500
what is the % for the developers?
-
Technician
- Rep Power
- 25
Re: C-2454 Errroe on bizhub c6500
before swap:
dev y = 130
m = 130
c = 222
k = 224
I swap dev y with k and m with c
result:
y (acctually k) = unreadable
m (acctualy c) = 170
c (acctualy m) = 224
k (acctually y) = 10
confused....!!!
-
Senior Tech
100+ Posts
- Rep Power
- 0
Re: C-2454 Errroe on bizhub c6500
the % I'm talking about, counter->details, see what they at, do not do any adjustments, just try to power the machine as regular
-
Technician
- Rep Power
- 25
Re: C-2454 Errroe on bizhub c6500
I am sorry.. I Will Check it tomorrow, please keep in touch
thanks for responding
-
Senior Production Tech
100+ Posts
- Rep Power
- 36
Re: C-2454 Errroe on bizhub c6500
hey guys this is how I fixed the issue . If you go to the I/O mode and type in 54-00 for yellow 2451
03 formag 2452
06 for cyan 2453
09 for blk 2454
run it untill it gets between 125-135 and stop exit out of mode and turn machine off.
run toner refresh about 3x and your good to go.
-
Technician
- Rep Power
- 25
Re: C-2454 Errroe on bizhub c6500
Hi Texchar555,
thank you so much, I run until +- 130, and turn off the machine.. but.. how to run toner refresh?
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Bookmarks