Cleaned, changed 2nd TR for a different one ...not new though, fault remained the same. Cleaned all contacts and earthing points, still no difference .
Cleaned, changed 2nd TR for a different one ...not new though, fault remained the same. Cleaned all contacts and earthing points, still no difference .
Did you try to thoroughly clean the laser unit glass?
' "But the salesman said . . ." The salesman's an asshole!'
Mascan42
'You will always find some Eskimo ready to instruct the Congolese on how to cope with heat waves.'
Ibid
I'm just an ex-tech lurking around and spreading disinformation!
That will be possibly my next step together with reconecting the HV unit, just want to get some more infos whilst waiting for brand new TR. It could be fairly misty inside the LU.
OK.
My ghosting problem came back again.
Cleaned spotlessly everything on 2nd transfer side and it went away for 2 weeks. Now it came back again. Cleaned everything again as before and I was not so lucky this time. Problem still persists. It does not appear however on A4 R (A4 landscape) have not tried A3 yet...
see scans below:ghost600dpi.pdf
Firmwares HERE.OK Google! ... will I need Berrocca this morning?
those shadow around the print normally is paper dust on the ph laser window, the noise only the ph polygon mirror motor is spins that fast in the machine, so I can say your ph has a page paper or something loose in it.
Firmwares HERE.OK Google! ... will I need Berrocca this morning?
Just looked at the Test Print ...has the extra mylar sheet been added to the transfer roller area? It is designed for just that fault, without adjustment of transfer voltages.
Well ..I had a 2nd transfer unit in place that already had the mylar strip and it was still doing it. I could not figure out what is causing it despite playing with the settings, I decided to change the whole 2nd transfer assembly and the one I put in did not have the mylar strip and it worked. however eventually it came back... until I fluffed around with the settings to get the best results.
It has been running for 2 days now and it seems like its OK..hope I haven't jinxed it
Firmwares HERE.OK Google! ... will I need Berrocca this morning?
Bookmarks