Konica Minolta C450 Forward TX error??

**Jude** · 10-26-2012

I know this old but does anyone have a solution?

BBm · 04-05-2013

Originally Posted by Jude

I know this old but does anyone have a solution?

If you're setup is a domain, try creating an OU in the AD (or simply create a username in the AD) and allow this to have full access on the locally shared folder. Also, add this domain user account to the local admin group on the pc.

**RRodgers** · 04-05-2013

Originally Posted by ivanlawrence

Yes they are all on the same version of firmware, not sure what version that is but it was done by the Konica Minolta tech.

I haven't read the whole thread but check to make sure that the HDD is enabled on the machine that is giving you a fit. Sometimes doing firmware the copier will disable the HDD.
HTH
GL

**habik** · 10-22-2013

Originally Posted by Jude

I know this old but does anyone have a solution?

Solution in my case is:

if Win 7

Check what profile you have on your network and sharing center. If you have Public it will give you Forward TX error.

Change it to Home Network and see how it goes.

**David Morrison** · 06-20-2014

Originally Posted by habik

Solution in my case is:

if Win 7

Check what profile you have on your network and sharing center. If you have Public it will give you Forward TX error.

Change it to Home Network and see how it goes.

Not sure how this would fix the error since it only happens when I scan to email from the copier.

Anyway, I have a fix if when you scan to email and it does work, but sends [spam?] in front of the title in the email. If you are having both of these problems on the same machine then an upgrade to version 20 will fix both problems.