+ Reply to Thread
Results 1 to 3 of 3

Thread: bizhub c250 no on

  1. #1
    Trusted Tech 50+ Posts alfpanasonic is on a distinguished road alfpanasonic's Avatar
    Join Date
    Jan 2007
    Location
    Gaia
    Posts
    73
    Rep Power
    7

    bizhub c250 no on

    When I bind bizhub c250 in main and to follow in sub-main the machine it always shows the hourglass and later it disconnect.

    Any information?

  2. #2
    Senior Tech 100+ Posts Bizhub is an unknown quantity at this point Bizhub's Avatar
    Join Date
    May 2007
    Posts
    127
    Rep Power
    0
    You nvram has failed.
    contact Konica-Minolta and get them to replace it. If that fails you could try the nvram recovery tool.

    Good luck

  3. #3
    Trusted Tech 50+ Posts alfpanasonic is on a distinguished road alfpanasonic's Avatar
    Join Date
    Jan 2007
    Location
    Gaia
    Posts
    73
    Rep Power
    7

    Thumbs up Solved

    Problem solved, I executed firmaware and evrything is ok
    Thanks

+ Reply to Thread

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts