We recently purchased a Bizhub C350 and I cannot seem to find the options where to confgure the network settings. It's currently set to DHCP which is working fine. I tried on the Printer itself and through IE but I does not display ANY advanced features, even with the Admin Mode and password.
network settings is in the admin screen. If you login on the browser as admin refresh the screen a couple of times. Some browsers don't show the network config immediately.
When I login in with the Admin password , the only Network options which are available are: Summary and LDAP Setting, no IP info or anything. This seems very strange.
Does the screen say 'power on controller' if so the controller is turned off or it has been removed and the machine is configured for a fiery. Otherwise just click some of the options on the screen the IP stuff will appear eventually this is a 'feature' of the internal controller.
Hi, I've attached my Screen and as you can see I'm missing all those settings...........the wierd thing is the printers working fine. It's not like it cant see the Fiery Box.
are you using the latest version of firmware?
if yes, try to install driver of impression in another tcp/ip port
if not, make the update firmware and try again install driver of impression in another tcp/ip port
Have you tried clicking on the "Web Tools" button? That is where all the Fiery settings are located (when using web interface). They can accessed through the panel via the "Controller" button.
if you have a fiery you will have no access to ip settings via a browser you have to use the fiery control panel so utility->controller details->menu->run setup
Bookmarks