Thanks:
0
Likes:
0
Dislikes:
0
-
Technician
- Rep Power
- 27
KM BH C451 SKEW PRINT from BYPASS
i have'd problem skew print from bypass in km c451, i allready to check size paper its ok..
Any ideas for solve this problem? thanks
-
Senior Tech
100+ Posts
- Rep Power
- 29
Re: KM BH C451 SKEW PRINT from BYPASS
You really mean the machine does the skew only when you print from Bypass Tray? Because I find it hard to believe.. have you checked prints from the other trays?
-
Technician
- Rep Power
- 27
Re: KM BH C451 SKEW PRINT from BYPASS
i'm sure only from bypass, if i print from tray its more better than bypass.... skew approximetly 2-3 mm
-
Re: KM BH C451 SKEW PRINT from BYPASS
This Parts & Service manual can be purchased for $12.77 and downloaded immediately after payment from
Just Manuals ~ The Internet's largest selection of manuals ~ Instant Downloads
Paul@justmanuals.com
-
Re: KM BH C451 SKEW PRINT from BYPASS
Retrofit hardware to C652 bypass.
-I
-
Technician
- Rep Power
- 27
Re: KM BH C451 SKEW PRINT from BYPASS
Hi have you tried increasing/decreasing the paper loop adjustment?
Service Mode, Machine,Printer Resist Loop, 2
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Bookmarks