Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 6 of 6
  1. #1
    Technician rangertech's Avatar
    Join Date
    Jun 2011
    Posts
    40
    Rep Power
    13

    KM BH C451 SKEW PRINT from BYPASS

    i have'd problem skew print from bypass in km c451, i allready to check size paper its ok..
    Any ideas for solve this problem? thanks


  2. #2
    Service Manager 100+ Posts
    Join Date
    Feb 2011
    Location
    Brasov
    Posts
    229
    Rep Power
    0

    Re: KM BH C451 SKEW PRINT from BYPASS

    You really mean the machine does the skew only when you print from Bypass Tray? Because I find it hard to believe.. have you checked prints from the other trays?


  3. #3
    Technician rangertech's Avatar
    Join Date
    Jun 2011
    Posts
    40
    Rep Power
    13

    Re: KM BH C451 SKEW PRINT from BYPASS

    i'm sure only from bypass, if i print from tray its more better than bypass.... skew approximetly 2-3 mm


  4. #4
    Service Manager 10,000+ Posts
    KM BH C451 SKEW PRINT from BYPASS

    JustManuals's Avatar
    Join Date
    Jan 2006
    Location
    Las Vegas, NV
    Posts
    10,041
    Rep Power
    140

    Re: KM BH C451 SKEW PRINT from BYPASS

    This Parts & Service manual can be purchased for $12.77 and downloaded immediately after payment from

    Just Manuals ~ The Internet's largest selection of manuals ~ Instant Downloads

    Paul@justmanuals.com



  5. #5
    Service Manager 250+ Posts Ianizer's Avatar
    Join Date
    Jul 2011
    Location
    NW, United States
    Posts
    381
    Rep Power
    19

    Re: KM BH C451 SKEW PRINT from BYPASS

    Retrofit hardware to C652 bypass.
    -I


  6. #6
    Technician
    Join Date
    Jun 2011
    Location
    Auckland, NZ
    Posts
    25
    Rep Power
    13

    Re: KM BH C451 SKEW PRINT from BYPASS

    Hi have you tried increasing/decreasing the paper loop adjustment?
    Service Mode, Machine,Printer Resist Loop, 2


Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •