KM BH C451 SKEW PRINT from BYPASS

[rangertech]

i have'd problem skew print from bypass in km c451, i allready to check size paper its ok..
Any ideas for solve this problem? thanks

[empiru]

You really mean the machine does the skew only when you print from Bypass Tray? Because I find it hard to believe.. have you checked prints from the other trays?

[rangertech]

i'm sure only from bypass, if i print from tray its more better than bypass.... skew approximetly 2-3 mm

[JustManuals]

This Parts & Service manual can be purchased for $12.77 and downloaded immediately after payment from

Just Manuals ~ The Internet's largest selection of manuals ~ Instant Downloads

Paul@justmanuals.com

[Ianizer]

Retrofit hardware to C652 bypass.
-I

[Spratt]

Hi have you tried increasing/decreasing the paper loop adjustment?
Service Mode, Machine,Printer Resist Loop, 2