Thanks:
0
Likes:
0
Dislikes:
0
-
Fuser Noise
Trying to figure out what is causing a clicking/slipping gear sound in a bizhub cf3102. Seems to be related to the gear that tensions the fuser roller.
-
Senior Tech
100+ Posts
- Rep Power
- 29
Re: Fuser Noise
Hi! If you open the fuser unit, you will notice a sensor that determines when the pressure roller is "pressed" on the fusing belt and when not. If that sensor is broken, it never stops "pressing" and that causes the gears to slip.
I hope you understand my bad english..change that sensor and I'm 95% sure it will stop making noises.
-
Re: Fuser Noise
Sorry. What's bizzie cf3102 N/A model?
-I
-
Technician
- Rep Power
- 27
Re: Fuser Noise
Ianizer- The machie was known as a Minolta CF3102. Not a bizhub they were around quite a while before the bizhub range.
I beleive Empiru has the right idea a new fuser may be the easier way to go though.
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Bookmarks