Thanks:
0
Likes:
0
Dislikes:
0
-
KMB 420 and 500 issue, machine freez
Hello, I've got some problem with two KMB's, one 420 and one 500. Both have firmware v.31 and it seems as same issue.
After few (sometimes its 50 prints sometimes 500 prints) machine freez. Current job is buffering to memory, but machine doesn't print it. It even getting another jobs to queue. But it feez like this.
Tried few drivers on computer, even few computers with diffrent windows versions. I've got no clue what can this be. Any help would be nice. Thanks in advice.
Greetings.
-
Re: KMB 420 and 500 issue, machine freez
Do they have Hard drives? Might try reformat. Maybe re- initialize network settings, and re-enter ip's.
-
Re: KMB 420 and 500 issue, machine freez
No hard drives, and done network initialization, without any luck
Thank you for reply.
-
Service Manager
250+ Posts
- Rep Power
- 31
Re: KMB 420 and 500 issue, machine freez
I had this on a few 420 & 500. Changed the network speed to 100 full duplex and the problem went away
-
Re: KMB 420 and 500 issue, machine freez
Thank you, will test this out!
-
Re: KMB 420 and 500 issue, machine freez
Last time I had this I had to replace the control pwb and nvram. I did both but I think it was the pwb. I had to change both because it came from another machine
-
Re: KMB 420 and 500 issue, machine freez
Thank you for reply. In few hrs will check out first that network speed issue, then if it wont help (but i hope it will I will get out control pwb. One more time thanks for sugestions. Kind regards.
Changed network speed for 100mbps/full duplex but it didnt help, so next thing is control pwb
Last edited by bonc; 07-27-2011 at 08:24 AM.
Reason: update
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Bookmarks