Page 1 of 3 123 LastLast
Results 1 to 10 of 22
  1. #1
    Trusted Tech 50+ Posts
    Join Date
    May 2008
    Location
    malibu
    Posts
    67
    Post Thanks / Like
    Rep Power
    0

    Problem Banner Printing On C550 And C451

    Hello Everybody.
    I Bought a C451 and a C550 Copier.
    My C451 Copier have a Banner Printing On the menu.In the other hand my C550 Copier Doesnt Have Banner Printing.
    At first I want to know what is a Standard Size for Banner printing ?
    How Can i activate this option on the C550?
    Thanks Everybody for Helping Me these days With your answers.
    Im waiting for your Suggestion again .

    Sincerely
    Mindhunter.


  2. #2
    Technician
    Join Date
    Jun 2011
    Location
    Jakarta
    Posts
    48
    Post Thanks / Like
    Rep Power
    7

    Re: Problem Banner Printing On C550 And C451

    650-550-451.jpg i think C550 can't print banner


  3. #3
    Service Manager 250+ Posts Ianizer's Avatar
    Join Date
    Jul 2011
    Location
    NW, United States
    Posts
    378
    Post Thanks / Like
    Rep Power
    13

    Re: Problem Banner Printing On C550 And C451

    Quote Originally Posted by SCHWARZ View Post
    i think C550 can't print banner
    I concur.

    On the 451, is the MK-715 accessory installed?
    Is an FS-519 installed?
    Do you have a Fiery?

    -I


  4. #4
    Technician knpgazem's Avatar
    Join Date
    Jul 2008
    Posts
    35
    Post Thanks / Like
    Rep Power
    13

    Re: Problem Banner Printing On C550 And C451

    Banner printing has been a common function on all Bizhub MFDs since the release of the C250.

    This includes, but not limited to, the C451 and C550 models

    if however, you have a staple finisher of any, kind banner printing is disabled.

    Banner printing is only available WITH a finisher on the latest models - C280 and C452 series.

    the correct sizes for banner printing are 297mm x 840mm. It is easiest to print a PDF banner. Printing will be delayed - don't hold your breath.

    MS Word page sizes do not allow this extreme paper size so as a workaround use a quarter size (148mm x 420mm) and then increase the size to fit the large paper size in the printer driver.

    remember, when the MFD is in banner mode, normal printing cannot be recieved by the device - the jobs will be deleted automatically. - bugger!

    p.s. if you remove the finisher (if attached) power cycle the MFD, banner printing will be available.

    Last edited by knpgazem; 08-01-2011 at 11:24 PM. Reason: addtional information

  5. #5
    Trusted Tech 50+ Posts
    Join Date
    May 2008
    Location
    malibu
    Posts
    67
    Post Thanks / Like
    Rep Power
    0

    Re: Problem Banner Printing On C550 And C451

    Quote Originally Posted by knpgazem View Post
    Banner printing has been a common function on all Bizhub MFDs since the release of the C250.

    This includes, but not limited to, the C451 and C550 models

    if however, you have a staple finisher of any, kind banner printing is disabled.

    Banner printing is only available WITH a finisher on the latest models - C280 and C452 series.

    the correct sizes for banner printing are 297mm x 840mm. It is easiest to print a PDF banner. Printing will be delayed - don't hold your breath.

    MS Word page sizes do not allow this extreme paper size so as a workaround use a quarter size (148mm x 420mm) and then increase the size to fit the large paper size in the printer driver.

    remember, when the MFD is in banner mode, normal printing cannot be recieved by the device - the jobs will be deleted automatically. - bugger!

    p.s. if you remove the finisher (if attached) power cycle the MFD, banner printing will be available.
    But I have 2 Copier Now . Both of them Doesnt have Finisher and Fiery. But in the C451 Menu We have Banner Printing Option While In the C550 We Dont .
    My Customer Ask Me why This one has Banner Printing And C550 hasnt.They Think Its A Big Different And C550 is worse than C451? I dont Know How to Explain them . its just a option and i cant Satsify them .So I want to know That what i have to do to just appear this option on the menu? even it will be decorative.


  6. #6
    Technician knpgazem's Avatar
    Join Date
    Jul 2008
    Posts
    35
    Post Thanks / Like
    Rep Power
    13

    Re: Problem Banner Printing On C550 And C451

    It sounds likely that the C550 is using old (original) firmware.

    please upgrade to the latest standard version.

    this should be done anyway, even if the banner mode still does not appear.


  7. #7
    Trusted Tech 50+ Posts



    Join Date
    Dec 2010
    Location
    Dallas
    Posts
    51
    Post Thanks / Like
    Rep Power
    8

    Re: Problem Banner Printing On C550 And C451

    When i went to class on this machine we were told that the C451 could do banner printing by seperating the sorter and placing the paper in the bypass unit, and C550 and C650 could not do banner printing. her is what ssd says:

    Products:
    bizhub C650
    bizhub C550
    Options:
    None Specified

    Details
    Subject:
    Is Banner printing supported?
    Description:
    Is Banner printing supported?
    Solution:
    Banner printing is not supported



  8. #8
    Service Manager 250+ Posts Ianizer's Avatar
    Join Date
    Jul 2011
    Location
    NW, United States
    Posts
    378
    Post Thanks / Like
    Rep Power
    13

    Re: Problem Banner Printing On C550 And C451

    I'd find knpgazem's explanation perfectly reasonable.Probably a simple base FW update.If youlook at the fine print, most specs are "subject to change without notice".-I


  9. #9
    Trusted Tech 50+ Posts
    Join Date
    May 2008
    Location
    malibu
    Posts
    67
    Post Thanks / Like
    Rep Power
    0

    Re: Problem Banner Printing On C550 And C451

    do you think it work ? if i change the FW?


  10. #10
    Trusted Tech 50+ Posts
    Join Date
    May 2008
    Location
    malibu
    Posts
    67
    Post Thanks / Like
    Rep Power
    0

    Re: Problem Banner Printing On C550 And C451

    Quote Originally Posted by Ianizer View Post
    I'd find knpgazem's explanation perfectly reasonable.Probably a simple base FW update.If youlook at the fine print, most specs are "subject to change without notice".-I
    do you think it work ? if i change the FW?



Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •