Thanks:
0
Likes:
0
Dislikes:
0
-
Senior Tech
100+ Posts
- Rep Power
- 34
Re: Scan problem With the Konica Minolta C450
Before you change some parts, test the following.
- Create a Box
- Scan into it
- If it's not work, HDD is in the most cases faulty
- If it's work, set HDD to "not installed" in Service Mode
- Restart the Engine and perform a SMB Scan
- Works ... smile and change HDD
- If not ... go back to start ;-)
-
Trusted Tech
50+ Posts
- Rep Power
- 0
Re: Scan problem With the Konica Minolta C450
Hey Guys, Hate to jump in here! But I need to see if anyone is interested in a brand new Transfer Belt and Fuser Unit, Part's 4049-523 and 4049-212 for this model? I'm trying to figure out how to make my own thread! sorry again for interupting Dukey PS SEND ME A MESSAGE IF YOU ARE!
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Bookmarks