Thanks:
0
Likes:
0
Dislikes:
0
-
Technician
- Rep Power
- 27
BizHub Pro 1050 EP Paper feed problem - J18-07
Hello!!!!
I'm having a problem with my BizHub PRo 1050 EP.
When I feed from drawer 4 in the PF, I get a J18-07 jam code.
From the manual - this code says - "The PF exit sensor (PS99) does not turn ON within a specified period of time after the loop sensor /2 (PS94) turns ON."
So I replaced the Exit sensor - no change
If I pre-feed a sheet partially through the feed rollers, this sheet feeds fine but the jam code comes up on the second sheet.
I relaced all of the paper feed rollers - didn't make any difference.
I'm thinking one of the PF clutches may be slipping, or maybe the rollers in the vetrical conveyance section might need replaced?
Any ideas on what I could try first or how I should diagnose this?
Or is there something else I should be looking at?
Thanx in advance,
Doug
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Bookmarks