Page 1 of 2 12 LastLast
Results 1 to 10 of 11

Thread: BIZHUB 600

  1. #1
    Trusted Tech 50+ Posts NEOTECH's Avatar
    Join Date
    Dec 2010
    Location
    JEDDAH
    Posts
    54
    Rep Power
    14

    BIZHUB 600

    i have a problem in BH-600 when i making copy machine is only scanning paper but no copy out put
    display showing message ([now printing) still machin is running what is tha problem some one help me plz.
    than'x



  2. #2
    Head Tech 250+ Posts SmellsHot's Avatar
    Join Date
    Dec 2009
    Location
    Sault Ste Marie, MI
    Posts
    484
    Rep Power
    21

    Re: BIZHUB 600

    Dirty sensors in the drum unit, located under the drum itself. just gotta clean out the drum unit.

    Everyone has the right to be stupid. Some people just abuse this privelage more than others

  3. #3
    ALIEN OVERLORD 2,500+ Posts fixthecopier's Avatar
    Join Date
    Apr 2008
    Location
    The Republic of Pineland
    Posts
    4,424
    Rep Power
    114

    Re: BIZHUB 600

    Yes, what he said.

    Democracy is still the worst form of government, except for all the rest of them.

  4. #4
    Trusted Tech 50+ Posts perdana's Avatar
    Join Date
    Jan 2008
    Location
    Pekanbaru
    Posts
    62
    Rep Power
    0

    Re: BIZHUB 600

    Try change TCSB sensor at drum unit.


  5. #5
    Service Manager 10,000+ Posts
    BIZHUB 600

    JustManuals's Avatar
    Join Date
    Jan 2006
    Location
    Las Vegas, NV
    Posts
    10,041
    Rep Power
    140

    Lightbulb Re: BIZHUB 600

    This Parts & Service manual can now be purchased for $12.77 and downloaded immediately after payment from

    http://www.justmanuals.com


    Paul@justmanuals.com



  6. #6
    Trusted Tech 50+ Posts
    Join Date
    Jul 2008
    Location
    Budapest
    Posts
    56
    Rep Power
    19

    Re: BIZHUB 600

    Quote Originally Posted by NEOTECH View Post
    i have a problem in BH-600 when i making copy machine is only scanning paper but no copy out put
    display showing message ([now printing) still machin is running what is tha problem some one help me plz.
    than'x
    Hello,

    Could you help me? We have the exactly same problem. Did you solve the problem?

    Thanks

    Gergő


  7. #7
    Field Supervisor 2,500+ Posts
    Join Date
    Jun 2009
    Posts
    3,020
    Rep Power
    83

    Re: BIZHUB 600

    Every time I have seen this issue, it was due to the MFP originally having a key counter (this could also be any kind of copy tracking device) on it. The key counter was removed, and the pigtail was not re-inserted, or the billing/vendor mode settings were not changed to reflect the change. On the newer color devices, a drum past its life stop setting would cause this, but on this model, it was always the key counter. I'm not sure if the cleaning web past its count might cause this, but it might be worth checking under life settings in service mode. Emujo

    If you don't see your question answered in the forum, please don't think it's OK to PM me for a personal reply...I do not give out firmware and/or manuals.

  8. #8
    ALIEN OVERLORD 2,500+ Posts fixthecopier's Avatar
    Join Date
    Apr 2008
    Location
    The Republic of Pineland
    Posts
    4,424
    Rep Power
    114

    Re: BIZHUB 600

    If you were running and then one time it is "stuck" printing, pull the drum and clean or replace the sensor that reads the patch on the drum.

    Democracy is still the worst form of government, except for all the rest of them.

  9. #9
    RTFM!! 2,500+ Posts allan's Avatar
    Join Date
    Apr 2010
    Location
    Centurion
    Posts
    2,523
    Rep Power
    50

    Re: BIZHUB 600

    Does that machine show "ready to copy" before you scan?


    I have seen faulty finishers sensors that does not display a jam cause the same problem. The machine will just keep on idling.

    Whatever

  10. #10
    Trusted Tech 50+ Posts
    Join Date
    Jul 2008
    Location
    Budapest
    Posts
    56
    Rep Power
    19

    Re: BIZHUB 600

    Quote Originally Posted by emujo View Post
    Every time I have seen this issue, it was due to the MFP originally having a key counter (this could also be any kind of copy tracking device) on it. The key counter was removed, and the pigtail was not re-inserted, or the billing/vendor mode settings were not changed to reflect the change. On the newer color devices, a drum past its life stop setting would cause this, but on this model, it was always the key counter. I'm not sure if the cleaning web past its count might cause this, but it might be worth checking under life settings in service mode. Emujo
    Thanks all the quick helpful answer. I think the problem is around the key counter, because ther was a SafeQ pro terminal. I tolt it that to my collegue but he didn't found anything.
    Next wednesday we will see it.

    Thank you again

    Gergő


Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •