Thanks:
0
Likes:
0
Dislikes:
0
-
Senior Tech
100+ Posts
- Rep Power
- 33
Bizhub 750 - J3101 jam codes only with multiple copy runs?
Hi all,
Having issues with my favourite old piece of crap the Bizhub 750! The machine will copy single sheets fine but as soon as I try to do a run of 2 or more copies it jams on the 2nd one. All jams refer to J3101 (paper leading edge sensor)
I have tried cleaning it and cleaning the window it looks down into but it hasn't made any difference. Has anyone else ever seen this and have any tips/advice?
Really hope someone out there can help as it is driving me mad!
Cheers.
-
Trusted Tech
50+ Posts
- Rep Power
- 30
Re: Bizhub 750 - J3101 jam codes only with multiple copy runs?
Does it happen from all trays?
-
Senior Tech
100+ Posts
- Rep Power
- 33
Re: Bizhub 750 - J3101 jam codes only with multiple copy runs?
It does indeed. I have ended up ordering the lead edge sensor and the reg clutch but I'm not even that confident that will fix it. Not much else to go on in the service manual unfortunately.
-
Re: Bizhub 750 - J3101 jam codes only with multiple copy runs?
Did you get a reply on your J3101 jams?
I have a VL6022 it is happening when using tray 1
Let me know.
Thanks
-
Junior Member
- Rep Power
- 0
Re: Bizhub 750 - J3101 jam codes only with multiple copy runs?
Change the bearings from registration roller. Faulty bearings provide a delay in rotation of the registration roller.
-
Senior Tech
250+ Posts
- Rep Power
- 33
Re: Bizhub 750 - J3101 jam codes only with multiple copy runs?
Check the registration motor and associated gears for wearing. The motors got history of problems. Try replacing it.
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Bookmarks