cardreader solutions about Konica pro 920
The machine doesnot work because he need an card(reader)
I tried to solve it with HDD format but still it doesnot disapear
Please send me an solution if possible
Thanks
cardreader solutions about Konica pro 920
The machine doesnot work because he need an card(reader)
I tried to solve it with HDD format but still it doesnot disapear
Please send me an solution if possible
Thanks
Need to go into billing mode and disable the coin vender option.
And Star Trek was just a tv show...yeah right!
thx please inform how , we are wholesaler company and not very specialized in konica
thx in advance
patrick
Might need the key counter link putting back in??
@ tech 51
machine came in without card reader , any other solutions ?
rgds
patrick
What message are you getting on the panel?
panel is now showing " please insert key counter "
I think that this is a 'loop connector' that tells the machine that there is no key counter connected- if you are a wholesaler, you should have plenty of Konica machines available to check this- look for the small rectangular cutout in the machines where a key counter would fit, and see the four pin loop connector attached to the wiring-temporarily place this in your problem machine and see if it solves your problem. Even though the connector is a four-pin connector, the machines usually have a two-pin loop to complete the circuit and satisfy the machine.
2000 mockingbirds = 2 kilomockingbirds
Bookmarks