cardreader

[patrick045]

cardreader solutions about Konica pro 920
The machine doesnot work because he need an card(reader)
I tried to solve it with HDD format but still it doesnot disapear
Please send me an solution if possible
Thanks

[Mr Spock]

Need to go into billing mode and disable the coin vender option.

[patrick045]

thx please inform how , we are wholesaler company and not very specialized in konica

thx in advance

patrick

[tech51]

Might need the key counter link putting back in??

[patrick045]

@ tech 51

machine came in without card reader , any other solutions ?


rgds

patrick

[tech51]

What message are you getting on the panel?

[patrick045]

panel is now showing " please insert key counter "

[tech51]

panel is now showing " please insert key counter "

Then as I posted earlier, the Key Counter link needs to be put back in!!

[ddude]

Then as I posted earlier, the Key Counter link needs to be put back in!!

I think that this is a 'loop connector' that tells the machine that there is no key counter connected- if you are a wholesaler, you should have plenty of Konica machines available to check this- look for the small rectangular cutout in the machines where a key counter would fit, and see the four pin loop connector attached to the wiring-temporarily place this in your problem machine and see if it solves your problem. Even though the connector is a four-pin connector, the machines usually have a two-pin loop to complete the circuit and satisfy the machine.