Thanks:
0
Likes:
0
Dislikes:
0
-
Senior Tech
100+ Posts
- Rep Power
- 32
Bizhub 350, DF 605 jamming
I have a bizhub 350 that is jamming when the paper feeds in. The paper feeds to the triple gray roller and then just stops. It is registering as a transport jam in the counters.
I have replaced the pickup, feed and sep rollers and blown out the feeder to clean sensors etc. It is an intermittant jam, not every copy.
-
Re: Bizhub 350, DF 605 jamming
This Parts & Service manual can now be purchased for $12.77 and downloaded immediately after payment from
Just Manuals ~ The Internet's largest selection of manuals ~ Instant Downloads
Paul@justmanuals.com
-
Technician
- Rep Power
- 33
Re: Bizhub 350, DF 605 jamming
Hello,
check/replace the torque limitter on the seperation roller assy,tends to turn heavy.Giving too much friction with jams as result.
-
Senior Tech
100+ Posts
- Rep Power
- 32
Re: Bizhub 350, DF 605 jamming
Thanks for the replies. The problem was caused by a 1 way bearing on the back side of the triple gray transport roller. I took the back cover off of the df and found the 1 way bearing. I cleaned the 1 way and roughed up the shaft and it fixed the problem.
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Bookmarks